How to change the passcode on Phoenix 1262

[Guest Shawntre]

I need to reset the electronic passcode for the Phoenix Centurion 1262 fireproof safe, as a member of staff saw me using the passcode today. Can anybody help?

[green-foam]

To change the code you should follow the instructions below:


1. Press button C
2. Enter the current passcode (this may be the factory default 1,2,3,4 or a previously set user code of 4-16 digits)
3. Press button # (a melody will sound to confirm your code)
4. Turn the knob to open the lock
5. With the lock open, press the # button
6. Enter the code from step 2 (the default factory code 1,2,3,4 or previously set user code)
7. Press the # button
8. Enter a new 4-16 digit code
9. Press the # button.

Your code is now set to the one entered in step 8

[Guest]

Got safe have no codes safe is open but locks are out an can't close door

 

[Guest]

Hello

Please see below a copy of the instructions for the electronic lock:
http://www.safelincs.co.uk/templates_safelincs/files/datasheets/1779_SS1620E-Electronic-Lock-Instructions.pdf

If you refer to the second page and the section that says "setting a new personal code" this explains how to change the code.

I hope this helps

[Tom Sutton]

If you do not have the present code you will not be able to change but you could contact the manufacturer and see if they can help, there may be a way to reset to factory code.

[Guest Re set code]

Inside the safe is a red button can you re set a new code from there not knowing the original?

[Safelincs]

Which model safe do you have? We can then check out the manual.

 

Harry

[Guest bob]

Hi

I have just bought a Phoenix Data Combi DS2503E from the local tip with a broken handle and they said the code was 2016 and they unlocked it before I took it . I have it home and now it will not open is there a delay on it or something im doing wrong

thanks

[Safelincs]

Hi Bob

you need to make sure that the batteries are replaced in the front cover should they be low. Here also the lock instructions for the Phoenix Data Combi fire safe. If the standard factory code shown does not work you will need to get an original invoice to prove ownership to Phoenix before they issue a master code which is probably not possible in your case.

Harry

[Guest Maxine]

Hi I've just started a new job and need to change the office safe combination. We have a Phoenix Fire Fighter 0421, can anyone please give me instructions. Thanks

[Safelincs]

Hi

TO SET THE PERSONAL CODE

1. Press the # button.
2. Press the green code change button located on the back of the safe door
3. Enter your personal 3 to 6 digit code and press # button to set.
4. The lock will emit a tone and the LCD will display IN. to confirm the new code.
5. To change the code follow the same procedure with the door and lock in the open position.

This lock can be programmed with an 8 digit master code;
which cannot be removed, but can be edited. Consider carefully
if you require this function before entering a second code.

 

TO SET THE MASTER CODE

1. Press the # button
2. Enter 0,0
3. Press the green code change button.
4. Enter the selected 8 digit master code.
5. The lock will emit a tone and the LCD will display IN. to confirm the master code.

test before you close the door

 

Harry

[Guest Stephen]

When i enter the code the LED says opened, but the safe is closed. I am locked out, any ideas?

[green-foam]

It may be the batteries are nearly flat and are only able to power the LED display but too flat to open the bolt.

Have you tried changing the batteries?

[Guest Alex]

Hi , we have large Phoenix Fireproof cabinet. It was not used for the last 2 years due to COVID , since we worked from home. Unfortunately the combination and other documents were lost. What would be the procedure to recover the code?

[green-foam]

You will need a receipt/proof of purchase to obtain a "Master code" (That may or may not work, depending on model) If you do not have this, you will have to call a locksmith.