Rahel Lock
-
Posts
31 -
Joined
-
Last visited
Rahel Lock's Achievements
-
Good morning Harry the post you refer to above is nearly 10 years old and the document linked has expired. This seems to be the new version. @AnthonyB please feel free to correct me, if I'm wrong. thanks Rahel
-
Hi the short answer is yes, P50 extinguishers fulfil all legal requirements. For a bit more information please feel free to read this article. Rahel
-
Good afternoon if your reminder is with us (Safelincs Ltd) there should be an unsubscribe link in the reminder email. Alternatively you can send us an an email to support@safelincs.co.uk and we can unsubscribe you from our side. I hope this helps. Rahel
-
Hi the Dicon 370MBX hasn't been tested for compatibility with the SBBRKSM Easichange alarms and therefore I wouldn't recommend using this unit to replace your alarm. thanks Rahel
-
Hi Stephanie as a first step I would strongly advise to evacuate your home in case of carbon monoxide being present and call Gas Emergency Services on 0800 111 999 for next steps. Please don't go back into your property until it has been checked and cleared for carbon monoxide as you can't see or smell the gas. regards Rahel
-
Hi Eric ok, thanks for pointing this out again. We don't currently have any air transfer grilles that work on cold smoke. Maybe someone else here has any experience? Thanks Rahel
-
Hi Eric you could use our fire rated intumescent air transfer grill which is available in the size of your hole (150x150cm). I hope this helps. Rahel
-
Hi Jo we haven't had any feedback from customers yet using the SBBRKSM on the old DETA1111 bases. Sadly, for us there is no way of testing this. The new units were designed to fit on the BRK baseplates but the older units had different wiring and may not be compatible. thanks Rahel
-
Hi Rob you can replace your BRK670MBX with our Easychange SBBRKSM smoke alarms. In our testing there don't appear to be any issues when mixing the old BRK670MBX units with our SBBRKSM, but we can't guarantee that it will work reliably with a larger system or over long periods of time. Therefore we would recommend that you replace all 7 of your units at the same time. I hope this helps Rahel
-
Good morning Gareth thank you very much for your question. The easichange SBBRKSM alarm is a new unit we developed specifically so it can be used on the 660MBX and 670MBX baseplates. Like you say logically they should also fit your DETA1111 alarms but we have not tested this and therefore cannot guarantee it will work. thanks Rahel
-
Good morning the SBBRKSM alarms will fit your 660MBX push fit bases however the colour of the SBBRKSM doesn't quite match your unit. Additionally the 660MBX push fit base is already a deep base which will in combination with the SBBRKSM alarm result in a bulky unit. So you can use the replacement but it might not be aesthetically pleasing. I hope this helps. Rahel
-
Hi Andy the Kidde Firex KF does not fit the same baseplate. Unfortunately we don't have a replacement which fits onto the existing Deta 1111 baseplate. Thanks Rahel
-
Hi the manufacturer Britannia chose not to test for Class B and C as the rating would be quite low and people who actually have those fire risks would be better off with a different, more capable model like the A-Foam / B-Foam or Powder.
-
Dorgard plunger depth advice for an elevated fire doorframe
Rahel Lock replied to a topic in Fire Doors and Accessories
Good morning the plunger travel of the Dorgard is 2cm so a 5cm gap would be too large. The Geofire Agrippa Acoustic Door Closer might be a solution. This is also battery operated and acoustically triggered and gets installed at the top of the door. Thanks Rahel -
Hi Safelincs offers surface mounted drop down seals here which an be used on fire doors with up to 14mm gaps: https://www.safelincs.co.uk/surface-mounted-drop-down-smoke-seal/?q=gap I hope this helps! Rahel